A-A-2558A
3.10.3 Zinc Plate. The coating shall be electro-deposited zinc and shall be subjected to a chemical or
electrochemical chromating. The minimum thickness shall be 0.0003 inch.
3.10.4 Hot Phosphate. The coating shall consist of chemically produced phosphate, followed by a
coating of preservative.
3.10.5 Oxide Coating. The coating shall consist of chemically produced oxide, followed by a coating of
preservative.
3.11 Identification Marking. Each drill shall be etched or stamped in permanent and legible manner
with the manufacture’s name or identifying symbol of such known character that the source maybe
readily identifiable, part number, and country of origin.
3.12 Workmanship. All drills shall be free from imperfections which may affect their safety,
appearmce, serviceability, or durability.
|
NSN |
Size Number |
Height of head (max) inch |
Length of feed (min) inch |
Length of handle (min) inch |
American Standard Taper Socket Number |
Size of Drill inch |
Torque Load (min) Pound-inch |
|
5110-00-555-1784 |
1 |
5 |
2 |
9 |
1 |
1/16 to 9/16 |
2500 |
|
5110-00-223-5028 |
8 |
6-314 |
2-112 |
15 |
3 |
59/64 to 1-1/4 |
5500 |
Table I. American Standard self-holding taper socket.
4. REGULATORY REQUIREMENTS.
4.1 Recovered Material. The offeror/contractor is encouraged to use recovered materials to the
maximum extent practicable, in accordance with paragraph 23.403 of the Federal acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE.
5.1 Product Conformance. The product provided shall meet the salient characteristics of this
Commercial Item Description, conform to the producer’s own drawing, specifications, standards, and
quality assurance practices, and be the same product offered for sale in the commercial market. The
government reserves the right to require proof of such conformance.
5.2 Responsibility for Inspection. Unless otherwise specified, the contractor is responsible for the
performance of all inspection requirements and may use any commercial facilities (including the
contractor’s own facilities) suitable for performance of the inspection requirements, unless disapproved
by the Government. The Government reserves the right to perfomr any of the inspections deemed
necessary to assure the item conforms to the specified requirements.
6. PACKAGING. Preservation, packaging and marking shall be as specified in the contractor order.
7. NOTES. This section contains information of a general or explanatory nature that is not mandatory.
7.1 Source of Documents.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business