A-A-2936A
3.3 Interchangeabilitv. All part shall be designed and manufactured to definite standards, clearances and tolerances in order that any such parts of particular type or model maybe replaced, interchanged and adjusted without modification of the replacement part or any other parts of the unit.
3.4 Identification Marking. The reamer shall be marked with the manufacture’s name or identifying symbol, and the state or country of manufacture, unless otherwise specified. All identification markings shall be engraved, etched, molded or indented directly on the item’s surface in such a manner that it remains clearly legible throughout the life of the item
4. REGULATORY REQUIREMENTS.
4.1 Recovered Materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal acquisition Regulation (FAR).
4.2 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified (using conversion tables contained in the latest revision of Federal Standard 376) and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch- pound units, a request should be made to the contracting officer to determine if the product is acceptable.
5. PRODUCT CONFORMANCE.
5.1 Product Conformance. The product provided shall meet the salient characteristics of this Commercial Item Description, conform to the producer’s own drawing, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5.2 Responsibility for Inspection. Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements and may use any commercial facilities (including the contractor’s own facilities) suitable for performance of the inspection requirements, unless disapproved by the Government. The Government reserves the right to perform any of the inspections deemed necessary to assure the item conforms to the specified requirements.
6. PACKAGING. Preservation, packaging and marking shall be as specified in the contract or order.
7. NOTES. This section contains information of a general or explanatory nature that is not mandatory.
7.1 Source of Documents.
American Society for Testing and Materials (ASTM), PO Box C700, West Conshohocken, PA 19428-
2959.
Federal Acquisition Regulation (FAR): Government Printing Office, Superintendent of Documents,
Washington DC. 20401 -9371..
General Services Administration, Specification Section (3FP-E), Suite 8100, 470 L’Enfant Plaza, SW,
Washington, DC 20407.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business