+)))))))))),
*INCH-POUND*
.))))))))))-
A-A-52207
August 12, 1996
SUPERSEDING
MIL-C-386D
2 April 1974
COMMERCIAL ITEM DESCRIPTION
CUTTER, BARBED WIRE, INSULATED HANDLES, HAND OPERATED The General Services Administration has authorized the use of
this Commercial Item Description for all federal agencies.
1. SCOPE
1.1 Scope. This commercial item description covers one type of hand operated, barbed wire cutter with insulated handles.
1.2 Intended use. The cutters covered by this commercial item description are intended for use in the field to cut barbed wire which is charged with a high voltage.
2. SALIENT CHARACTERISTICS
2.1 Materials and components. Materials and components shall be as specified herein. Where materials are not definitely specified, they shall be of the quality normally used for this purpose in commercial practice provided the completed cutters comply with all provisions of this commercial item description.
2.2 Tool steel, alloy. Alloy tool steel shall conform either to ASTM A 681 or commercial fine grain tool steel possessing the chemical composition specified in table I.
+))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))),
* Beneficial comments, recommendations, additions, deletions, *
* clarifications, etc., and any other pertinent data which may *
* improve this document should be sent to: Commander, U.S. Army *
* Natick Research, Development and Engineering Center, *
* ATTN: SSCNC-WEF, Natick, MA 01760-5018 by using the *
* Standardization Document Improvement Proposal (DD Form 1426) *
* appearing at the end of this document or by letter. *
.)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))-
AMSC N/A FSC 5110
DISTRIBUTION STATEMENT A. Approved for public release;
distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business