+)))))))))),
*INCH-POUND*
.))))))))))-
A-A-52208
August 27, 1996
SUPERSEDING
MIL-C-3958C
22 November 1972
COMMERCIAL ITEM DESCRIPTION
CUTTER, CABLE, HAND OPERATED, WITH GROPING HOOK GUIDE The General Services Administration has authorized the use of
this Commercial Item Description for all federal agencies.
1. SCOPE
1.1 Scope. This commercial item description covers one type and size hand operated cable cutter with a groping hook guide, having the capacity to cut a 3/8 inch diameter solid steel wire.
1.2 Intended use. The cable cutters covered by this commercial item description are intended for cutting electrically charged barbed wire entanglements and electrical transmission lines not exceeding 5000 volts potential.
2. SALIENT CHARACTERISTICS
2.1 Materials and components. Materials and components shall be as specified herein. Where materials are not definitely specified, they shall be of the quality normally used for this purpose in commercial practice provided the completed cable cutters comply with all provisions of this commercial item description.
+))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))),
* Beneficial comments, recommendations, additions, deletions, *
* clarifications, etc., and any other pertinent data which may *
* improve this document should be sent to: Commander, U.S. Army *
* Natick Research, Development and Engineering Center, *
* ATTN: SSCNC-WEF, Natick, MA 01760-5018 by using the *
* Standardization Document Improvement Proposal (DD Form 1426) *
* appearing at the end of this document or by letter. *
.)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))-
AMSC N/A FSC 5110
DISTRIBUTION STATEMENT A. Approved for public release;
distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business