A-A-50116A
2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
2.2 Visual examination. Each lot of axes shall be inspected in accordance with MIL-STD-105. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hundred units shall be 4.0. The lot size shall be expressed in units of axes. The sample unit shall be one axe. The axes shall be examined for the defects listed below:
Finish not smooth and adherent; not free of burrs, rough spots, sharp edges, slivers, flat areas or projections; any component missing or not specified type; any component fractured, split, dented, bowed, malformed, damaged or loose; rivets not properly peened; head and spike not firmly attached to shaft; pick teeth not smooth; markings in wrong location, incomplete, illegible, incomplete, or not as specified.
2.3 Dimensional examination. The axes shall be examined without damaging or disassembling the axes. Any dimension not within the specified tolerances shall be classified as a defect. The lot size shall be expressed in units of axes. The sample unit shall be one axe. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 2.5.
3. PACKAGING
3.1 Packaging. Each axe shall be packaged in a snug-fitting box fabricated from 200 test corrugated fiberboard.
3.2 Packing. Twenty-four axes, packaged as specified, shall be packed in a snug-fitting, corrugated, fiberboard shipping container conforming to style RSC, type CF, class domestic, grade 275 of PPP-B-636. The shipping container shall be completely filled with no voids and of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with appendix of PPP-B-636.
3.3 Palletization. When specified (see 4.2), axes, packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means C and D, or film F or G, in accordance with MIL-STD-147.
3.4 Marking. In addition to any special markings required by the contract or purchase order, unit packs, shipping containers, and palletized unit loads shall be marked in accordance with MIL-STD-129.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business