A-A-52130
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
4. PACKAGING
4.1 Packaging, packing, and marking. The slotting tools and the slotter and scraper tools shall be packaged, packed, and marked in accordance with the domestic or overseas requirements of ASTM D 3951, as applicable (see 5.2).
5. NOTES
5.1 Intended use. Type D slotting tools are intended for light or intermittent undercutting of the mica insulation between the commutator bars. Type E slotter and scraper tools are intended for cleaning commutator slots and for slightly beveling the copper edges.
5.2 Acquisition requirements. acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Type of slotting tool required (see 1.2).
c. Type of packaging, packing, and marking requirements required (see 4.1).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business